Two-Load Lamp Module  No. PLC-R 2264E

It can be fixed behind your any existing switches and only can be connected with incandescence lamp; It's extreme small size (43.25x47mm and only 18.9 mm thick); Memorize 16 address codes totally at the same time. Note: After fixed, except dimming by your existing switch panel, you can realize Bright/Dim function by other controllers (Remotes/Mini-Controllers/Telephone Responder/Computer interface, and so on). No dimming by switch panel directly.

Technical Specs:
Rated Voltage: 230VAC±10%，50Hz
Lamp Load: ≤400W in sum, each<300W
Static State Wastage: <1W
Suitable Temperature: -10～50℃

Functions:
Control Lamp ON / OFF.
“Codes Set Electronically” is very easy and convenient in only 6 seconds.
Memorize 16 address codes totally;
16 address codes cleanup fast function;
Long-distance control through computer, telephone.
Respond to “All Lights On/All Units OFF, Bright / Dim” command..
Low signal driver (25mV).
Compatible with any X10 controller.

The Differences between Micro Series:

Between #2263E and #2264E:
#2263E can control only one lamp, and #2264E can control two lamps;

Between #2256E and #2264E and #2221E:
#2256E is in-line module. it should be fixed on the lamps in the ceiling;#2264E should be fixed behind your existing switches.
#2221E is the whole switch with SIMTONE Panel, back part size is 43.25x47mm and only 18.9 mm thick .

Between #2264E and #2266E:
#2264E need "Neutral", but #2266E don't need "Neutral";
Generally, we suggest our customers try to leave a "Neutral" in their switch junction box; Thus, the whole system will be more steady .