Lamp Module (Aust/NZ)
PLC-P 2026AU
Fashion Casing Design is for Australia and NZ
market. A power line noise filter in it can prevent the lamp
noise¡¢Installing easily with electronically set codes¡¢Compatible
with any X10 controller.
¡ñStreamline casing design;
¡ñSecurity baffle design at the plug part;
¡ñLamp soft start;
¡ñA power line noise filter in it can prevent the lamp noise;
¡ñInstalling easily with electronically set codes;
¡ñLED Indicator£¬Compatible with any X10 controller;
¡ñResponds to All lights on/All off control command.
Compatible with any X10 Controllers
Compatible with any X10 controllers. For example: With X-10 Timer,
you can ON lamps in your home on timing; With X-10 Mini-Controller,
you can control all the lamps ON/OFF on bed or in chairs; and with
Computer controller, you can control lamps in your home ON/OFF on
web; also with Telephone Remote Controller, you can control all
things above just though a phone line.
Installing easily with codes electronically set
Advanced Codes electronically set function in domestic. After
pressing the Code set bottom for 5 seconds into setting situation,
and use your controller (such as; Mini-controller) transmit address
you want, then the plug-in module receives the address and memory it
into EEPROM. You have done it in 5 seconds! All the processing is
all automatic, very simple! Switch in break-off can memory this
address for ten years.
It can respond ¡°All lamps On / All Units Off¡± command.
When being out, you can turn off all lamps in your home only through
one keystroke.
Low-signal driver (25mV)
X10 Carrier Signal can be absorbed by some lamps and switches and
weaken signal, even sometimes lower than 100mV, while the signal
down to 100mV can't be accept. So you needn't to worry about the
absorption of X10 signal with the low-signal driver wall switch
which can accept minimum 25mV.
Built-in ¡°noise¡± filter can prevent the lamp noise.
With research, most of lamps don¡¯t conform to electromagnetic
compatible. Those will send out power line noise leading
interference to X10 system. Our product is design for Asia
specially, and a built-in noise filter can prevent the lamp noise.
¡¡
